 |
|
PAGE 1
| Home Gunstocks Swords Sharpening Links Email me here! |
|
UPDATED 09/05/10
MOST of these knives have been SOLD, unless otherwise noted. They also can be Special Ordered. Special Orders are running at 30+ days at this time.
Check Out our NEW DAMASCUS KNIVES, ground from Brad Vice's Great USA Damascus. I handmake knives that are made from various steels, such as ATS-34/440C Stainless Steel. I also use L6, 1084 & 5160 Carbon Steel. I enjoy recycling good tool steels from tools like Old Sawmill Circular Blades, chainsaw bars and Ferriers Rasps the Horseshoers have worn out as well as Railroad Spikes and Auto Springs. These steels make superior knives as the tool steel is Hi-Carbon and holds a superior edge when hardened correctly. The USA Damascus I use is made from Forged Cable or USA Billets from Alabama Damascus. The handle materials I like to use are Bone, Antler, Exotic Burlwoods, but I will use others by special order such as ivory or man made material like G-11. Soon to come. More Knives Forged from Spring
Steel, Cable ( Damascus) and other Hi-Carbon Steels. Don't miss our Sword Page with Mono Steel/Damascus Katanas
and Tantos. Swords |
| Click on the thumbnails to enlarge. Double-click to return to thumbnail size. |
8 1/2" Damascus Gut Hook Drop point with Beautiful California Buckeye Burl Handle with mosaic and Brass Pins, Blade is 4" and knife is 8 1/2" Overall, Convex Ground Blade with Deep Etch. Comes with Heavy Leather Pouch Sheath as shown. $215.00.+ $9.95 Shipping & Ins. SOLD! We are not doing special orders with GUTHOOKS at this time. |
Sorry Sold New Model. My Utility Skinner/EDC. 7 1/2" Total Length with a Blade of 3" from choil to tip. Made from an old Ferriers Rasp leaving a lot of the old rasps character. Handle is Beautiful Cocabola. Blade is finished in a Hi-Polish which resist tarnishing. Hi-Carbon requires a little care , but it holds an edge really well.$135.00 + $10.00 Shipping. Leather Pouch Sheath Included. |
AVAILABLE New Model. A slender Damascus Skinner with a total length 8 5/8" and a 4 1/4" blade slightly under 3/16" Thick X 1 1/4" at the widest. Made with USA Damascus. Measured from tip to Handle. Handle Fossilized Walrus Oosik with 3 Copper Tubes. $195.00 + $10.00 Shipping. Leather Pouch Sheath Included. |
SOLD A Special Filet/Fillet Knife . 7 1/2" Blade, total length 12 1/2", 1/16" at the thickest.. All one Damascus Piece from butt to tip. Special Copper Liners and Copper Tubes and Mosaic pin. Bookmatched Ironwood Slab Handle. Deep Leather Pouch Sheath Included. $175.00 + $10.00 Shipping. |
 SOLD A Custom Filet (fillet) Knife made from Tool Steel (Bandsaw Blade) Hi-Carbon Steel. R-60/61. Blade is 7 1/2". (Cutting Edge) Overall 13 1/2". Handle is Bookmatched Buckeye Burl which has been Professionally Stabilized. New Handle Design brings the handle farther forward for more comfortable thumb and finger notches. Better control. $130.00 + $10.00 Shipping. Leather Pouch Sheath Available. |
SOLD Giant Alaska Carbon Steel (Fillet) Filet/Carver with Gorgeous Cocacobola Handle. Beautiful Figure on the wood. Blade is 10" Convex Ground with a great edge and a Great Knife for those Big Fish. Bandsaw Carbon Tool Steel Blade is Sandblasted/Blued Finish and shows it's Old Bandsaw origin. 3/32" Thick. Overall length Approximately 15". A Great Knife for those who Hate Sharpening Their Stainless Steel Filet and . Deep Leather Pouch Sheath Available. $95.00 + $10.00 Shipping. |
Sold A Full Tang Droppoint Skinner of 440C Hi-Carbon SS. 9 1/4" Total Length with a Cutting Edge of 4 1/4".Flat Ground with Convex Edge. Approximately 7/32" thick and 1 1/2" at the widest part of the blade. Polished Buffalo Horn with Copper Tubes attaching the Slabs. A Heavy Leather Pouch Sheath is included. $185.00 + $10.00 shipping |
Sold Our Hunter with a Modern Touch, Full Tang, 440C Stainless Blade with a beadblasted finish. It has a Great Looking Bookmatched Buckeye Burl Slab Handle which has been Professionally Stabilized. It has a brass Thong Hole and Two Special Mosaic Brass Pins. Brass Guard. Total Length of 12" with a Blade of 7" and 1/8" thick. A Heavy Leather Sheath is included. $185.00 + $10.00 Shipping. |
SOLD A Full Tang 440C Stainless Droppoint. It has a Tough Nearly Indestructable Slab Handle of Man made G-10, A Beautiful Translucent Pale Green in Sunlight with A Center Mosaic Pin, Thong Hole and One Brass Pin. Total Length of 8 1/2" with a Blade of 4 3/8" X 1/8" thick. Also Features a Little Spine Filework. Comes with a Heavy Leather Sheath. $135.00 + $10.00 Shipping. SOLD. |
| Click on the thumbnails to enlarge. Double-click to return to thumbnail size. |
  A Full Tang Finger Hole Skinner. Made from a worn out Ferriers Rasp. I've left some of the neat looking File Pattern on the Blade. I also left some of the File Notches on the spine, for your thumb. It has a Great Looking Stabilized Buckeye Burl Slab Handle, Thong Hole and Two Brass Pins. Total Length of 7 1/4" with a Blade of 2 3/4" X 3/16" thick. A Heavy Leather Form Fitted Pouch Sheath is included. $145.00 + $5.00 Shipping.SOLD. |
Just Sold A Full Tang 440C Stainless Droppoint. It has a Great Looking Ram Slab Handle. Thong Hole and One Brass Pin. Total Length of 8 5/8" with a Blade of 4 1/4" X 3/16" thick. A Heavy Leather Sheath is included. $199.00 + $10.00 Shipping. This one is SOLD. |
  SORRY, SOLD. A Full Tang L6/Old Sawblade Droppoint with Hand Carved Wolf Paw Prints. It has a Great Looking Bocote Handle. Thong Hole and Two Brass Pins. Total Length of 7 1/2" with a Blade of 3 1/2" X approximately 1/8" thick. A Heavy Leather Pouch Sheath is included. $125.00 + $10.00 Shipping. |
SOLD A Full Tang 440C Mirror Polished Stainless Droppoint. It has a Great Looking Bookmatched Buckeye Burl Slab Handle with Red Liners, Thong Hole and Two Brass Pins. The Buckeye has been Stabilized. Total Length of 8 1/2" with a Blade of 4 3/8" X 3/16" thick. A Heavy Leather Sheath is included. $185.00 + $10.00 Shipping. |
 Newest 8 3/4" Damascus Upswept Skinner with Beautiful Composite Burlap/Brass Handle with mosaic and Brass Pins, 4 1/2" Blade, 8 1/2" Overall, Flat Ground Blade with Deep Etch. Comes with Heavy Leather Pouch Sheath as shown. $195.00.+ $10.00 Shipping & Ins. SOLD! |
We are now offering this New Custom Carving Set. Carver made from Old Carbon Steel Circular Sawblade and Antler Handle with Hi-Polished Butt. Small Mosiac Pin. Blade 1/8" Thick, 7" Cutting edge, 12" total length. Matching 12 1/2" Fork from a Bandsaw Blade, Antler Handle with Mosaic Pin. A special Gift for that Wedding/Anniversary Etc. $195.00 + $10.00 Shipping. This one is SOLD, but can be Special Ordered. It would be slightly different due to differences in Antler pieces. |
NEW!!! Handsome Damascus Hunter with Elk Slab Handle. Overall length is 10 1/2". Blade is 5 1/2" with 4 3/4" cutting edge. Finger Choil Notch and Thumb notches in Spine for Secure Comfortable Choking Up. Made from a 415 Layers Billet of Damascus from Brad Vise. Generous 4 7/8" Elk handle has Mosiac Pins and a Thong Hole. Brass Guard. Feels good in Left or Right Hand. Priced at $215.00 + $10.00 Shipping. Just finished this one. Comes with a Heavy Leather Pouch Sheath. SORRY, SOLD! |
 NEW!!! Handsome 3 Finger Skinner with Stabilized Buckeye Burl Handle. Great Color and Figure in the Buckkeye Burl. Blade is Highly Polished Convex Ground File Steel from a Ferrier Rasp. Overall length is 6 1/4". Blade is 3 1/8" with 3" cutting edge. Finger Notch and Thumb notches in Spine for Secure Comfortable Grip. Brass Pin and Brass Thong Hole securing the Buckeye Burl Handle. Feels good in Left or Right Hand. Priced at $135.00 + $5.00 Shipping. Just finished this one. SOLD. Comes with a Heavy Leather Pouch Sheath. |
Nice Hunter Drop point from Brad Vice Damascus Steel. Blade 4 1/2", 4" Cutting Edge, 8 3/4" Total Length, Slightly over 1/8" thickness, Rockwell 60. Finger Notched Handle of Elk Antler with 1 Mosiac Pins and Red Liners. Comes with Heavy Leather Pouch Sheath. $215.00 + $10.00 Shipping. Ins. SOLD. |
8" Damascus Drop Point with Smooth Elk Slab Handle. Full Tang knife with 3" Cutting Edge. Brass Pin & Lanyard Hole. Made from Brad Vice's Damascus Steel. Basic Heavy Leather Sheath Included. $195.00. SOLD A Special Order for This knife with the Elk Slab Handle may or not be possible due to the rarity of wide solid antler. Check with me before ordering. |
NEW!!! Awesome Damascus Skinner with Amazing California Buckeye Burl Handle. Overall length is Approx. 6 1/2". Blade has 2 7/8" of cutting edge. Finger Notch for Secure Comfortable Grip. Made from a 416 Layers Billet of Damascus from Brad Vise. 3 1/4" of Buckeye Burl handle has One Mosaic Brass Pin and a Lanyard tube. Feels good in Left or Right Hand. Priced at $185.00 + $10.00 Shipping. Sorry Just SOLD. Comes with a Heavy Leather Pouch Sheath. |
Nice Drop point Hunter from Old Sawblade Steel, Antique Finish / L6 Carbon Tool Steel. 4 3/4" Blade, Brass Guard, 9. 5" Total Length, Blade Close to 1/8" thickness, 4 1/4" cutting edge - Rockwell 60. Choil Finger Notched for Choking Up. Spine has Thumb Notches, Handle of Rams Horn and Bone. Comes with Heavy Leather Pouch Sheath. $185.00 + $10.00 Shipping and Ins. SOLD. |
Carbon Steel (Fillet) Filet/Carver with Great Looking California Buckeye Burl Handle. About the most gorgeous wood you can find and it's Stabilized. Blade is 8" Convex Ground with a great edge. Bandsaw Carbon Tool Steel Blade is Sandblasted/Blued Finish and shows it's Old Bandsaw origin. 3/32" Thick. Overall length Approximately 12". Great Knife for those who Hate Sharpening Their Stainless Steel Filet. Deep Leather Pouch Sheath Available. $95.00 "SOLD" |
A Finger Hole Upswept Skinner. Finger Hole is big enough for a large hand. 1/8" Blade Thickness. 4 1/2" cutting edge with an overall length of 8 1/4". 1 1/2" Unsharpened Clip. Nice Polished Bone Handle. Engraved Bear Paw with Native American Design on Left Side. Carbon L-6 Steel. Rustic Finish shows minor pitting from it's Sawblade origin. 1/8" Thick. Heavy Leather Pouch Sheath. $150.00 "SOLD" |
|
|
|
|
To Order Directly By Credit Card Email Us for Instructions or use your card through PayPal |
|
|
|
Click Here for Gunstock Carvings |
All designs & images are the sole property of Ken Wolfe of GreyWolf Knives. Any duplication, copying, or publication of any materials from this web site without prior written permission is strictly forbidden! © 2010 |
